1 Off - Used 770 Gallons (3500L) stainess steel Limpet Coiled mixing vessel.  Measuring 4'-10" inside diameter x 6'-3" straight shell plus 10" deep dishes at both ends giving an overall internal dimension of 7'-11".  Limpet Coiled over shell and bottom dish with 3"n/b stainless steel half tube.  Top half of vessel lagged and stainless steel clad.
2 1/4" diameter stainless steel shaft with 28" diameter 4 Straight bladed prop. (Bolted blades from 3 1/2" x 3/8") and 20" diameter.  4 Straight bladed prop.  4 Internal baffles from 5" x 1/4" x 6'-0" long, set off the shell.
The top dish is bolted and hung from a framework with mounting feet that bolt to a mezanine floor. Measurement from underside of feet to outside of bottom dished end is approximately 4' - 2".

CONNECTIONS:
      Top Dish  -  1 x 19 1/2" diameter access with hinged cover.
                           1 x 4" sightglass
                           1 x 4" B.S.T'E' Flanged con.
                           1 x 3" Vent
                           2 x 2" ISS (female)
                           2 x 2" with tundish and hinged cover.
Vessel Shell  -  1 x 3/4" BSP socket
Vessel Bottom dish  -  1 x 2" ISS (female)
Limpet coil shell  -  1 x 3" B.S.T'E' flanged conn.
Limpet coil dish  -   1 x 2" B.S.T'E' flanged conn.

NAMEPLATE DETAILS
Manufactured by  -   John Dore & Co.
Design Code -   BS5500 Cat 2
DESIGN PRESS - Shell - Atmos.  Coil - 25 PSI & F/V
DESIGN TEMP - Shell - 100 degrees c   Coil - 135 degrees c
HYD TEST PRESS - Shell - Water fill  Coil - 50 PSI G
RADIOGRAPHY  -  Shell - 10%

Agitator Drives
Aiton - Chemineer Model MDJ - 080 - 212.  Vertical unit.
6 Kw / 1.5 Kw.  Output speed 126/63rpm
Cromp. Park. T.E.F.C. Flange mounted motor 6Kw / 1.5Kw (dual voltage)
1430 / 720rpm.  Frame size D.132MD.

FULL CAPACITY 810 gallon